Ionpure Process Equipments Inc
Ionpure Process Equipments Inc
Send Email
0804895157070% Response Rate

Home » Our Product Range » Temperature Transmitters

Temperature Transmitters

Offering you a complete choice of products which include rosemount 1056 dual channel transmitter, process temperature transmitter and vertex type flow transmitter.

Rosemount 1056 Dual Channel Transmitter


Rosemount 1056 Dual Channel Transmitter
  • Rosemount 1056 Dual Channel Transmitter
  • Rosemount 1056 Dual Channel Transmitter
  • Rosemount 1056 Dual Channel Transmitter
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 65,000 / UnitGet Latest Price

Product Brochure
Product Details:
Model Name/Number1056
Product Weight1.5 kg
Dimension155 mm x 155 mm x 131 mm
Ambient Temperature0-55 Degree Celsius
Temperature for Turbidity0-50 Degree Celsius
Relative Humidity5 to 95% (non-condensing)
Storage Temperature-20 to 60 Degree Celsius

Multi-parameter Transmitter for Liquid Analysis: The Rosemount 1056 Dual Channel Transmitter displays up to two independent liquid analytical measurements. HART and Profibus DP digital communication options allow for connection to HART hosts and Profibus networks. Start-up and installation of the 1056 is easy by using Quick Start Programming.  

Independent Dual Input Measurements: 
  • Expandable to two channels of liquid analytical measurements: pH/ORP, Conductivity, Free Chlorine, Total Chlorine, Dissolved Oxygen, Ozone, and Turbidity. 
  • Modular boards with auto-recognition of sensor board.
  • Large, easy to read, user customizable display of dual measurements in addition to diagnostic and temperature readings.

Reduced Installation and Maintenance Time: 
  • Shorter installation times using Quick Start programming at initial install or after factory reset. 
  • Effortlessly connect with PLCs and DCS' by choosing the HART or Profibus DP communication options. 
  • Display measurements, configure alarms, and conduct maintenance with a simple to use local operator interface.
  • Efficiently manage your devices using intuitive device dashboards on AMS/475 Communicators.

Accurate, Linear and Reliable Measurements of Analytical Sensors:
  • Faster calibration of pH sensors using auto pH Buffer solution detection. 
  • Linear conductivity measurements with on-board concentration curves for common acids and bases.
  • Built-in features to easily display accurate amperometric and turbidity measurements.

1056 Dual Channel Transmitter: Rosemount 1056 Dual Channel Transmitter is a line powered device that can accept inputs from pH/ORP, ISE, flow, conductivity (contacting and toroidal), turbidity, and amperometric (dissolved oxygen, chlorine, and ozone) sensors.
  • Faster installation using Quick Start programming, auto-recognition of sensor boards and modular design. 
  • At a glance view of pertinent information provided by the large customizable display. 
  • Visibility of process parameters by utilizing HART or Profibus DP digital communications 
Yes! I am Interested

Process Temperature Transmitter


Process Temperature Transmitter
  • Process Temperature Transmitter
  • Process Temperature Transmitter
  • Process Temperature Transmitter
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6,500 / UnitGet Latest Price

Product Details:
Model Name/NumberPPL23-TX
BrandProcess Parameter
Operating Range-50 to +250 Degree Celsius (Sensor)
Country of OriginMade in India
Sensor TypePlatinum Resistance Thermometer Pt100, 3 wire
Housing MaterialSS
Ambient Temperature0 to +70 Degree Celsius

Our series of sensors are evolutions of the traditional temperature probe designs. They are designed to offer the end-user a compact design that is easy to use and maintain. The sensor is built around a single piece fabricated stainless steel housing which houses both the sensor and transmitter board. The customer interfaces with the unit via an industry-standard DIN43650 or M12 connector. The clean lines and superb build quality make it ideal for use in applications where hygiene is important. Traditional terminal heads are clumsy and offer lots of potential dirt traps. Our PPL20 series avoids this.

Our PPL23-TX temperature sensor has a hygienic connection of your choice below the transmitter body. The addition of a cooling neck allows the probe to be used in higher temperature applications whilst protecting the electronics in the housing. It is suitable for the measurement of liquids and gases across a wide temperature range. All sensors are made to order so it is generally possible to meet all of your requirements.

The complete stem of the probe and housing is made from 316 stainless steel and is TIG welded closed to give a high-quality single piece product. Many metric and imperial probe diameters are available from 3mm upwards.

The connection type is the choice of our customer and we generally supply whatever is needed to fit directly to the connections you already have fitted on your equipment. All we need to know is the pipe size and the fitting specification, we will do the rest. We stock the most common types such as Tri-Clamp, RJT and IDF. We don’t normally supply the seals or clamps but are happy to do so should this be necessary.

Built-in is a 4-20mA output temperature transmitter that is loop-powered. We can configure the unit to any temperature range you require, or we can supply a USB interface and PC software that makes this easy on-site.

We offer a comprehensive calibration service and a wide choice of accessories.


  • Compact Temperature Transmitter with Standard
  • Sanitary Hygienic Connection
  • Tri-Clamp, RJT and IDF
  • Clean Simple Design
  • Ideal for use in Food, Beverage, Dairy and Pharmaceutical Industries
  • Choice of Stainless Steel Sheath & Body Sizes
  • UKAS or Traceable Calibration Available

General Specification:
Sensor Type: Platinum Resistance Thermometer—Pt100, 3 wire
Output: 4-20mA, 2 wire.
Power Supply: 10-30V d.c. Loop Powered.
Operating Range of Sensor: -50 to +250°C.
Ambient Temperature: 0 to +70°C (for transmitter housing)
Sheath/Housing Material: 316 stainless steel
Sensor Tolerance Band: Class B, Class A, 1/3 DIN, 1/5 DIN or 1/10 DIN
Transmitter Accuracy: ±0.1°C ±0.05% of Reading
Connector Types: A—DIN43650 IP65 (as shown in photo)
B—M12 IP67
Head Options: A – Ceramic Terminal Block
B – In Head Transmitter—various types
C – Tails for Customers Own Transmitter

Additional Information:

  • Delivery Time: 4 Weeks
  • Yes! I am Interested

    Vertex Type Flow Transmitter


    Vertex Type Flow Transmitter
    • Vertex Type Flow Transmitter
    • Vertex Type Flow Transmitter
    • Vertex Type Flow Transmitter
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 67,500 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Application MediaWater
    MaterialStainless Steel
    Temperature RangeOperating Temperature 90 Deg. C
    Model Name/NumberOptiswirl 4200
    Power Supply24VDC Loop Powered
    Flow Range0.83 to 8 m3/h
    Analog Output4 to 20 mA
    Operating PressureOperating Pressure 5 bar
    Country of OriginMade in India

    We can supply the stainless steel Digital Vertex type flow transmitter for Purified Water systems. 

    Additional Information:

  • Delivery Time: 4 to 6 Weeks
  • Yes! I am Interested


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Laxmishankar Yadav (CEO)
    Ionpure Process Equipments Inc
    Gala No. C-15A,Old Jivadani Industrial Estate,, Dhumal Nagar, Vasai East
    Mumbai - 401208, Maharashtra, India
    Call Us: 
    Call Response Rate: 70%
    Share Us :

    Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

    © Ionpure Process Equipments Inc. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Ionpure Process Equipments Inc